Wireless Modem Router User Guide
Chapter 2 Hardware Install
If you have not already set up your new router using the Quick Install Guide that comes in the box, this chapter walks
you through the hardware install. To set up your Internet connection, see Chapter 2 Quick Internet Setup.
Front Panel
The LEDs on the device are described below:
Power is supplied to the device.
Power is not supplied to the device.
System is functioning correctly.
System is functioning incorrectly.
Physical connection failure.
ADSL connection is established.
No connection established.
Connection is established.
Client connected successfully.
The WPS LED starts blinking if you pressed the WPS button on the device or interface.
If there is no wireless clients connected, the WPS LED turns off after blinking for 2 minutes.
USB （ available
only in D301）
Connection is successfully established on the USB port.
Connection is not established on the USB port.
