English-17
OPERATION
3
Press the ENTER
button.
The TV will begin
memorizing all of the
available channels.
The TV automatically cycles through
all of the available channels and
stores them in memory.
This takes about one to two minutes.
Press
ENTER at any time to
interrupt the memorization process
and return to the CHANNEL menu.
2
Press the UP/DOWN
buttons to select
“Auto Program”.
Press the ENTER
button.
1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps
1~2 on previous page.
Press the
MENU button.
Press the
UP/DOWN
buttons to select
“Channel”, then press the
ENTER button.
4
After all the available
channels are stored, the
Auto Program menu
reappears.
Press the
EXIT button to
exit.
Ex) Press to select channel 108.
Storing Channels in Memory (Automatic Method)
Press the CH
/
buttons.
Only the channels stored in memory are selected.
To check the channels stored in memory
To select channels over 100
Note: You can also press the
AUTO PROG. button to select
available channels.
02 BN68-00816A-00.qxd 2/3/05 9:49 AM Page 17
