
Before You Install the water line
•Thewaterlineinstallationisnotwarrantedbytherefrigeratormanufacturer.
So before you install the water line, read the whole steps for installing and follow these instructions
carefully to minimize the risk of expensive water damage.
•Bangingpipes(waterbanginginthepipes)inhouseplumbingcancausedamagetofridgepartsand
lead to water leakage or flooding. Call a qualified plumber to correct the problem before installing the
water supply line to the fridge.
•Topreventburnsandproductdamage,donothookupthewaterlinetothehotwaterline.
•Donotinstallthewaterlineinareaswheretemperaturesfallbelowfreezing.
•Whenusinganyelectricaldevice(suchasapowerdrill)duringinstallation,besurethedeviceis
insulated or wired in a manner to prevent electric shock.
•Allinstallationsmustbeinaaccordancewithlocalplumbingcoderequirements.
Connecting to water supply line
•ShutoffthemainwatersupplylineandturntheIcemaker
to the off position.
•Locatethenearestcolddrinkingwaterline.
•Followtheinstructionsinthewaterlterinstallationkit.
•AfterconnectingthewatersupplylinetotheCartridge
Holder inlet and installing the Filter Cartridge (insert plastic
line in fully).
•TurnonwatersupplyandFlush3gallonsthroughlter
before use (flush approximately 6 minutes)
•WaterlineKitandwaterlterarenotcoveredbySamsung’sWarranty.Themanufacturer(ordealer,
installer) of them is responsible for any defects and all the loss caused by water filter & water line
kit .
•Theltershouldbereplacedshouldbereplacedaccordingtomanufacturer(ordealer)’s
instruction.
•Toorderadditionalwaterlters,pleasecontactthemanufacturer(ordealer)ofthelter.
•Thewaterltermustbeinstalledoutsidetherefrigerator.
It is not provided with your new refrigerator. The filter cartridge
(8) and holder (9) kit can be purchased from the retailer where
you purchased this refrigerator.
•Donotusecopperline.
•Cutthetubing,makingsuretheendsaresquareandclean.
01 SETTING UP
90 degree
1. Cold Water line
2. Pipe Clamp.
3. Plastic line
4. Compression Nut
5. Compression Sleeve
6. Packing Nut
7. Shut Off Valve
8. Filter Cartridge
9. Cartridge Holder
Using the water filter (not provided)
Incorrect Correct
Setting Up _11
FLOORING
For proper installation, this refrigerator must be placed on a
level surface of hard material that is the same height as the
rest of the flooring. This surface should be strong enough
to support a fully loaded refrigerator, or approximately
223lbs(106kg). To protect the finish of the flooring, cut a
large section of the cardboard carton and place under
the refrigerator where you are working. When moving the
refrigerator, be sure to pull it straight out and return it to
position by pushing it straight in.
INSTALLATION OF THE WATER LINE