Setting the Remote Control To Work With Other Devices
Search Method
y
our TV remote can be set to
work various external devices
such as VCRs, Cable Boxes,
Satellite Receivers, Dss, DVD,
etc. by what is called the search
method of remote control pro
gramming.
If the ''Remote Code'' number
method shown on page did not
set your remote to work your
external device, then follow the
easy steps listed below.
Please read steps I -4 before
beginning.
CbeginJ
Press the POWER button on
the device your are attempting to
program to turn it ON.
<|> Place the TVA^CR/ACC
Mode Switch in the proper posi
tion.
Press the VCR . RECORD
and the SMART SOUND hut-
tons simultaneously and hold
them down.
<C4^ The device will begin to
change channels after the remote
identifies the correct code. When
the channels start to change
release the VCR RECORD and
SMART SOUND buttons. The
remote should be ready to oper
ate the device.
/ Smart Hi;u>
^ This method can take up to
g two minute to preform.
Don’t let the device scan up more
than five channels. If you do the
remote may pass up the right code
and another two minute search cycle
will have to be repeated.
If no channel change happens within
two minutes, repeat steps 1-4.
Should a channel change still not
occur, the remote will not work the
desired device.
Satellite Receiver
28
