Tuning Procedure (Manual Search)
2.
V
Push either the Programme Number Up “ A ” or Down “ V ” Button to
select the desired Programme Number on which you want to tune the
TV station of your choice.
3.
1
upward Search
1
CH
__
TUNE
UHF-L
Search
Push either the Level Adjust Up “+” or Down Button, the TV
station broadcasting on the next higher or lower frequency will be
automatically tuned and memorized.
1
CH
__
UHF-L
Panason i c
TUNE
The best tuning
position is auto
matically memorized
If an undesired TV station is received, push the same button again until
the desired TV station is tuned.
4.
Repeat steps 2 and 3 to tune all the available TV stations on the
remaining programme numbers.
Note:
Ensure that a new programme number is set (Step 2) before tuning
the next station.
PRE.
Return the TV set to the normal operation mode by pushing this button
3 times.
A maximum of 30 channels can be programmed.
Helpful Hint
(1) If you need the station name on the screen display together with Programme Position, for operation
details, refer to the Name Writing operation on page 44 to 45.
(2) After all stations are tuned, Push the Programme Number “Up” Button to confirm the tuning condition
for each programme position. If Programme Position is undesired, it possible to skip the Programme
Number, refer to the Programme Number skip operation on page 46 to 47.
39
