Advanced Settings
113
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
Note: If you use applications such as multiplayer gaming, peer-to-peer
connections, real-time communications such as instant messaging, or
remote assistance (a feature in Windows XP), you should also enable
Universal Plug and Play (UPnP) according to the instructions in
Universal Plug and Play on page 119.
To set up port triggering, you need to know which inbound ports the application needs. Also,
you need to know the number of the outbound port that will trigger the opening of the inbound
ports.
You can usually determine this information by contacting the publisher of the
application or user groups or newsgroups.
To set up port triggering:
1. Select Advanced >
Advanced Setup > Port Forwarding/Port Triggering.
2. Select the Port T
riggering radio button to display the port triggering information.
3. Clear the Disable Port Triggering check box if it is selected.
Note: If the Disable Port Triggering check box is selected after you configure
port triggering, port triggering is disabled. However, any port triggering
configuration information you added to the wireless modem router is
retained even though it is not used.
4. In the Port
Triggering Timeout field, enter a value up to 9999 minutes.
This value controls the inactivity timer for the designated inbound ports. The inbound
ports close when the inactivity time expires.
This is required because the wireless modem
router cannot be sure when the application has terminated.
