Dil ID: 12
Dil Adı: portugal
Dil Kodu: pt11tayfun Produtos da Marca JATA
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



8 Place the retaining frame back onto the shaving head holder.
9 Slide the guard back into place (‘click’).
10 Reattach the shaving head holder to the bottom part of the shaving
unit.
Cleaning the trimmer (RQ1187 only)
Clean the trimmer every time you have used it.
1 Switch on the appliance with the trimmer attached.
2 Rinse the trimmer under a hot tap for some time.
3 After cleaning, switch off the appliance.
Tip: For optimal trimmer performance, lubricate the trimmer teeth with a drop
of sewing machine oil every six months.
Cleaning the Beard Styler attachment (RQ1187CC only)
Clean the Beard Styler attachment every time you have used it.
1 Pull the comb off the Beard Styler attachment.
C F
2 Rinse the Beard Styler attachment and the comb separately under a
hot tap for some time.
Note: You can also clean the Beard Styler attachment and the comb with the
cleaning brush supplied.
3 Lubricate the trimmer teeth with a drop of sewing machine oil every
six months.
Storage
1 Slide the protection cap onto the shaving unit to prevent damage to
the shaving heads.
2 RQ1187CC, RQ1187 only: Store the shaver in the pouch supplied.
Replacement
For maximum shaving performance, we advise you to replace the shaving
head holder every two years.
Only replace the shaving head holder with an original RQ11 Philips
Shaving Head Holder .
Replacement reminder
To remind you to replace the shaving head holder, the appliance is
equipped with a replacement reminder which is activated automatically
after approx. two years. The replacement reminder is repeated at 9
successive shaves or until you reset the shaver.
1 The shaving unit symbol fl ashes when you switch off the shaver.
Note: The displays of the various shaver types look different, but show the
same symbol.
2 Pull the shaving head holder off the bottom part of the shaving unit.
ENGLISH ENGLISH
8 Place the retaining frame back onto the shaving head holder.
9 Slide the guard back into place (‘click’).
10 Reattach the shaving head holder to the bottom part of the shaving
unit.
Cleaning the trimmer (RQ1187 only)
Clean the trimmer every time you have used it.
1 Switch on the appliance with the trimmer attached.
2 Rinse the trimmer under a hot tap for some time.
3 After cleaning, switch off the appliance.
Tip: For optimal trimmer performance, lubricate the trimmer teeth with a drop
of sewing machine oil every six months.
Cleaning the Beard Styler attachment (RQ1187CC only)
Clean the Beard Styler attachment every time you have used it.
1 Pull the comb off the Beard Styler attachment.
C F
2 Rinse the Beard Styler attachment and the comb separately under a
hot tap for some time.
Note: You can also clean the Beard Styler attachment and the comb with the
cleaning brush supplied.
3 Lubricate the trimmer teeth with a drop of sewing machine oil every
six months.
Storage
1 Slide the protection cap onto the shaving unit to prevent damage to
the shaving heads.
2 RQ1187CC, RQ1187 only: Store the shaver in the pouch supplied.
Replacement
For maximum shaving performance, we advise you to replace the shaving
head holder every two years.
Only replace the shaving head holder with an original RQ11 Philips
Shaving Head Holder .
Replacement reminder
To remind you to replace the shaving head holder, the appliance is
equipped with a replacement reminder which is activated automatically
after approx. two years. The replacement reminder is repeated at 9
successive shaves or until you reset the shaver.
1 The shaving unit symbol fl ashes when you switch off the shaver.
Note: The displays of the various shaver types look different, but show the
same symbol.
2 Pull the shaving head holder off the bottom part of the shaving unit.
ENGLISH ENGLISH
RQ1187CC-87-67_EN_A6_CS3.indd 50 13.5.13 2:44:53 PM