
35
4 Clean the inside of the trimming head with the
cleaning brush.
5 After cleaning, put the trimming head back
onto the appliance.
Quick cleaning of the shaving head after wet
shaving or shaving with shaving foam
1 Cup your hand under a running tap and fi ll it
with water.
2 Switch on the appliance and hold the shaving
head in the water collected in your cupped
hand.
The running motor will help clean the inside of the
shaving head.
3 Move the shaving head around until all visible
foam has disappeared.
Note: The shaving head is fragile. Handle it carefully.
Replace the shaving head if it is damaged.
Thoroughly cleaning of the shaving head
1 Switch off the appliance.
2 Pull the shaving head off the appliance.
Note: The shaving head is fragile. Handle it carefully.
Replace the shaving head if it is damaged.
3 Rinse the shaving head with lukewarm water.
Do not clean the shaving head with the cleaning
brush, as this may cause damage.
4 Remove hairs from the cutters with the
cleaning brush.
Note: Do not brush the cutters in a different direction
then indicated, as this may cause damage.
5 After cleaning, snap the shaving head back onto
the appliance (‘click’).
Replacement
In case of frequent use, replace the shaving foil and
the cutters every year.
Shaving foil
1 Pull the shaving head off the appliance.
2 Remove the old shaving foil from the shaving
head.
ENGLISH ENGLISH