EP-308A POS
Page 11
Step 1: Slice the hard drive on to connect with the SATA connector.
Step 2: Fasten the screws.Step 0:
Figure 2-2: Aluminum Back Cover Retention Screws
2.3.2 CompactFlash® Installation
This section covers the installation of the CompactFlash® card.
Step 1: Remove the screw that holds the CompactFlash® card slot cover is place.
Step 2: Install the CompactFlash® card in the slot indicated below.
Figure 2–3: CompactFlash® Install
Step 3: Replace the cover and fasten the screws.Step 0:
