Replacing the Heat Sink Assembly: Dell XPS 730/730X Service Manual
file:///C|/Users/santhosh_v/Desktop/7/SM_en/cooling_.htm[9/5/2013 11:46:40 AM]
1 liquid cooling assembly 2 captive screws
CAUTION: Ensure that adequate thermal grease is applied to the top of the processor. Thermal grease is
critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation.
6. To install the liquid cooling heat sink assembly, apply thermal grease to the top of the processor as needed.
7. Align the screw holes on the liquid cooling assembly with the holes on the base of the computer, then tighten the six
screws to secure the assembly.
8. Connect the liquid cooling cable to the H2C connector on the Master Control Board (see Master Control Board
).
9. Close the computer cover (see Replacing the Computer Cover
).
10. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
