
Displays the processor L1 cache size
Displays the processor L2 cache size
Displays the processor L3 cache size
Indicates the amount of installed memory in MB
Indicates the amount of memory available in MB
Indicates the memory speed in MHz
Indicates the memory technology; DDR3
Displays the current time in hh:mm:ss format
Displays the current date in mm:dd:yy format
Displays the SATA1 drive integrated in the computer
Displays the SATA2 drive integrated in the computer
Displays the SATA3 drive integrated in the computer
Displays the SATA4 drive integrated in the computer
Displays the SATA5 drive integrated in the computer
Displays the eSATA drive integrated in the computer
l Secure Virtual Machine Mode — Enabled or Disabled (Enabled by default)
l AMD Cool 'N' Quiet — Enabled or Disabled (Enabled by default)
l USB Controller — Enabled or Disabled (Enabled by default)
l USB Operation Mode — High Speed; Full/Low Speed (High Speed by default)
Advanced Chipset Features
Enabled or Disabled (Enabled by default)
ATA/RAID (RAID by default)
Enabled or Disabled (Enabled by default)
Enabled or Disabled (Disabled by default)
Boot Device Configuration
Boot Settings Configuration
Configures the settings during system boot
Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected
CD/DVD Drives Boot Priority
Sets the CD/DVD drive boot priority. The items displayed are dynamically updated according to the drives detected
Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (Removable by default)
Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default)
Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default).
Specifies the ACPI suspend type. The default is S3
This option turns on the computer when you try to access the computer through the LAN (Enabled by default)
Specifies the behavior of the computer after recovering from a power loss (Off by default)
l On — The computer turns on after it recovers from a power failure
l Off — The computer remains off
l Last — The computer returns to the power state it was in before the power failure
Enables you to set an alarm to turn on the computer automatically
Status of supervisor installed