Dil ID: 12
Dil Adı: portugal
Dil Kodu: pt6tayfun Produtos da Marca Dell
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi
Anasayfa > Marcas > Dell > Computador > Studio XPS 435 MT (Late 2008)
Processor Cache L3
Displays the processor L3 cache size.
Memory Installed
Indicates the amount of installed memory in MB.
Memory Available
Indicates the amount of memory available in MB.
Memory Speed
Indicates the memory speed in MHz.
Memory Technology
Indicates the memory technology; DDR3.
Standard CMOS Features
Sytem Time
Displays current time in hh:mm:ss format.
System Date
Displays the current date in mm:dd:yy format.
SATA0
Displays the SATA0 drive intergrated in the computer.
SATA1
Displays the SATA1 drive intergrated in the computer.
SATA2
Displays the SATA2 drive intergrated in the computer.
SATA3
Displays the SATA3 drive intergrated in the computer.
eSATA
Displays the eSATA drive intergrated in the computer.
Advanced BIOS Features
CPU Feature
l Limit CPUID Value — Enabled or Disabled (Disabled by default)
l Intel
®
Virtualization Tech — Enabled or Disabled (Enabled by default)
l Execute Disable Bit — Enabled or Disabled (Enabled by default)
l Hyper-Threading — Enabled or Disabled (Enabled by default)
l Multiple CPU Core — All or 1 or 2 (All by default)
l IntelSpeedStep™Tech— Enabled or Disabled (Enabled by default)
USB Device Setting
l USB Controller — Enabled or Disabled (Enabled by default)
l USB Operation Mode — High Speed; Full/Low Speed (High Speed by default)
Advanced Chipset Features
SATA Mode
IDE; RAID (IDE by default)
Onboard Audio Controller
Enabled or Disabled (Enabled by default)
Onboard LAN Controller
Enabled or Disabled (Enabled by default)
Onboard LAN Boot ROM
Enabled or Disabled (Disabled by default)
1394 Controller
Enabled or Disabled (Enabled by default)
Boot Device Configuration
Boot Settings Configuration
Configures the settings during system boot.
Hard Disk Boot Priority
Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected.
First Boot Device
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (Removable by default).
Second Boot Device
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default).
Third Boot Device
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default).
Boot Other Device
No; Yes (Yes by default).
Power Management Setup
ACPI Suspend Type
Specifies the ACPI suspend type. The default is S3.
Remote Wake Up
This option turns on the computer when a user tries to access the computer through the LAN. The default is Enabled.
AC Recovery
Specifies the behaviour of the computer after recovering from a power loss.
¡ On — The computer turns on after it recovers from a power failure.
¡ Off — The computer remains turned off. This is the default state.
¡ Last — The computer returns to the power state it was in before the power failure.
Auto Power On
Enables you to set an alarm to turn on the computer automatically.
Auto Power On Date
Enables you to set a date to turn on the computer automatically.
Auto Power On Time
Enables you to set a time to turn on the computer automatically.