3. From the boot menu, select the number that appears next to the USB device.
The computer boots to the USB device.
Floppy Drive
1. In system setup, set the Diskette Drive option to USB.
2. Save and exit system setup.
3. Connect the USB floppy drive, insert a bootable floppy, and re-boot the system.
Jumper Settings
Clearing Forgotten Passwords
1. Follow the procedures in Before You Begin.
2. Locate the 2-pin password jumper (PSWD) on the system board, and remove the jumper to clear the password. See Jumper Settings.
3. Replace the computer cover (see Replacing the Computer Cover).
4. Connect your computer and monitor to electrical outlets, and turn them on.