Produtos da Marca Dell

11. Attach the computer stand (optional).

12. Connect your computer and devices to electrical outlets, and turn them on.

13. Right-click the My Computer icon and then click Properties.

14. Click the General tab.

15. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

Front-Panel Inserts

1. Shut down the computer.

2. Turn off any attached devices and disconnect them from their electrical outlets.

3. Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.

4. Remove the computer stand, if it is attached.

5. Open the computer cover.

6. Facing the front of the computer, use your fingers to remove the front-panel cover.



7. Press on the inserts until they pop free from the front-panel cover.



NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

CAUTION: Before you begin any of the procedures in this section, follow the "Safety Instructions."

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.