Dil ID: 12
Dil Adı: portugal
Dil Kodu: pt4tayfun Produtos da Marca Chrysler
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



The security light will also come on for about three
seconds when the ignition is first turned ON.
13. ABS Warning Light
This light monitors theAnti-Lock Brake System
(ABS) which is described elsewhere in this
manual. This light will come on when the
ignition key is turned to the ON position and
may stay on for approximately three seconds. If this light
remains on or comes on during driving, it indicates that
the Anti-Lock portion of the brake system is not func-
tioning and that service is required. See your authorized
dealer immediately. With the ABS malfunctioning, the
Brake Assist System (BAS) and Electronic Stability Pro-
gram (ESP) are also switched off. Both malfunction
indicator lights illuminate with the engine running. If the
charging voltage falls below 10 volts, the malfunction
indicator light illuminates and the ABS is switched off.
When the voltage is above this value again, the malfunc-
tion indicator light should go out and the ABS is opera-
tional. If the malfunction indicator light stays illumi-
nated, havethe systemchecked atyour authorizeddealer
as soon as possible.
14. Engine Oil Pressure Indicator Light
This light indicates that the engine oil pressure has
become too low. For a bulb check, this light will
come on momentarily when the ignition is turned ON. If
the light turns on whiledriving, stop the vehicle and shut
off the engine as soon as possible. See your authorized
dealer for service immediately.
15. Hybrid Gauge
This gauge indicates in what mode the vehicle is being
operated. Refer to “Hybrid Gauge” under “Instrument
Panel And Controls”, in Section 4 of this supplement.
22 INSTRUMENT PANEL AND CONTROLS