3. Use a 18# sleeve to loosen the fixing bolt of
camshaft timing gear.
Torque: 120±5Nm.
Note:
There is no difference between intake
camshaft and exhaust camshaft, they can be interchanged.
4. Use a cross-head screwdriver to loosen the fixing
bolt on inner fender of timing gear and then take out
the inner fender of timing gear.
5. Use a 10# sleeve to remove the fixing bolt of
camshaft bearing, take out the camshaft assembly
and then the hydraulic tappet system.
Torque: 9.5±1.5 Nm.
Note:
The positions of both camshaft bearing and
bolts, including the order of camshaft bearing, are
unchangeable, and should be conformity with the marks
during assembly/disassembly.
