ROAD SAFETY KIT
One 2-1/2# ABC DOT Approved fire extinguisher and one set of DOT approved hazard triangles
in plastic case shall be supplied with the apparatus. They shall ship loose with the apparatus.
CAB CRASHWORTHINESS TEST
Crew safety and Cab crash worthiness is extremely important to the Town. Certificates of testing &
compliance shall be provided with each bidder’s proposal.
No Exceptions
EXTERIOR GRAB HANDLES
The cab shall have a bright anodized extruded aluminum 24" grab handles at each door position.
Molded rubber gaskets shall be installed under the grab handles to protect the painted surface of the
cab.
FRONT GRILLE
A stainless steel square, three dimensional bright polished stainless steel front grille shall be
installed on the front cab face. The front grille shall have a radiator rock guard to assist in
preventing damage to the radiator core.
CAB MUDFLAPS
Mud flaps shall be installed behind the front tires. These mud flaps shall be a minimum of 22"
wide to protect the underneath of the cab and body.
CAB GROUND LIGHTING
One light shall be mounted beneath each door. These lights shall be designed to provide
illumination on areas under the driver and crew riding area exits. All cab ground lights shall switch
able and shall automatically activate when any cab exit door is opened.
MIRRORS
MOTO-MIRROR 16 1/2" X 7" stainless steel heated, remote control mirror heads shall be mounted
on spring loaded retractable mirror arms and shall Include a 5-1/2" x 8.5" convex mirror head.
CAB SIDE WINDOWS
Two AS-2 tempered glass, fixed side windows, 26-1/2" high x 16" wide shall be furnished, one on
each side behind the forward doors. All glass shall be tinted.
REAR WINDOW SAFETY BARS
There shall be a one inch stainless steel grab bar installed on each rear door. This bar is to be
installed on the rear door frame even with the window in the down position to prevent firefighters
from using the glass in the door for a handle.
UNDER CAB ENGINE MAINTENANCE LIGHTS
Two (2) engine maintenance lights shall be supplied beneath the cab. These lights shall illuminate
automatically when the cab is tilted to the full tilt position.
