Dil ID: 1
Dil Adı: english
Dil Kodu: en4 Mazda Brand's Products
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



mazda-2009-rx-8-user-manualmazda-2009-rx-8-user-manualmazda-2009-rx-8-user-manualmazda-2009-rx-8-user-manualmazda-2009-rx-8-user-manual
Page 1 of 4
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2010 Mazda Motor of America, Inc.
Subject:
COOLANT LEVEL WARNING LIGHT COMES ON
Bulletin No: 01-040/10
Last Issued: 07/13/2010
Service Bulletin
Mazda North American Operations
Irvine, CA 92618-2922
2004-2009 RX-8 - COOLANT LEVEL WARNING LIGHT COMES ON
BULLETIN NOTE
This bulletin supersedes the previous bulletin 01-006/09 issued on 02/10/09. The APPLICABLE MODEL(S)/
VINS,
REPAIR PROCEDURE, PART(S) and WARRANTY INFORMATION have been revised.
Changes are noted below in Red beside the change bar.
APPLICABLE MODEL(S)/VINS
2004-2009 RX-8 vehicles with VINs lower than JM1 FE**** ** 403405 (built before May 19, 2009)
DESCRIPTION
Some vehicles may experience the coolant level warning light comes on even though the correct amount of
coolant is in the coolant reserve tank and radiator.
The coolant level sensor float in the coolant reserve tank (A) is deteriorated and absorbs coolant. The float gets
heavy, and sinks, causing the the coolant level warning light comes on. As a mass-production change, the
design of the float has been modified.
Customers having this concern should have their vehicle repaired using the following repair procedure.