MWR211 User’s Guide
24
Confirm
Apply Click Apply to save your changes to the MWR222.
Ignore Click Ignore if you do not want to change the password at this
time.
Note: The management session automatically times out when the time period set in
the Administrator Inactivity Timer field expires (default five minutes; go to Chapter
24 to see how to change this). Simply log back into the MWR222 if this happens.
2.3 Resetting the MWR222
If you forget your password or IP address, or you cannot access the Web
Configurator, you will need to use the RESET button at the back of the MWR222
to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously saved, the password will be reset to
“1234,” and the IP address will be reset to “192.168.10.1”.
2.3.1 Procedure to Use the Reset Button
1 Make sure the power LED is on.
2 Press the RESET button for longer than one second to restart/reboot the
MWR222.
3 Press the RESET button for longer than five seconds to set the MWR222 back to
its factory-default configurations. The Power LED will start to blink to indicate that
the default configuration is being loaded.
