ACTIVATING RINSE AID WITH OPTION MULTITAB ACTIVATED
While the appliance is in user mode:
1. Press .
• The indicators and are off.
• The indicator continues to flash.
• The display shows the current setting:
– = rinse aid dispenser deactivated.
–
= rinse aid dispenser activated.
2. Press to change the setting.
3. Press on/off button to confirm the setting.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container with special salt for
dishwasher.
3. Fill the rinse aid dispenser with special rinse
aid for dishwasher.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
ADDING SALT
Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after
you fill the salt container, start a programme.
40
