Setting and starting a washing programme
Set the washing programme with the door ajar. The
washing programme only starts after you close the
door. Until then it is possible to modify the settings.
Do these steps to set and start a washing programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press one of two programme selection buttons again
and again until the digital display shows number
corresponding to the required programme. Refer to
the chapter 'Washing programmes'.
4. Close the door.
– The washing programme starts.
When the washing programme operates, you cannot
change the programme. Cancel the washing pro-
gramme
Warning! Only interrupt or cancel a washing
programme if necessary.
Caution! Open the door carefully. Hot steam can
come free.
Cancelling a washing programme
1. Press and hold function buttons B and C until:
– The programme selection indicator lights start to
flash (for about 2 seconds).
– The programme selection indicator lights come on
with a fixed light.
– The digital display shows two horizontal lines (-
-).
2. Release function buttons B and C to cancel the wash-
ing programme.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent before you set
a new washing programme.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interrup-
tion.
Setting and starting a washing programme with
delay start
1. Press the on/off button.
2. Set a washing programme.
3. Press the delay start button until the display shows
on flashing the necessary delay start of the washing
programme.
– The delay start indicator light comes on.
4. Close the door.
– The number on the display comes on with fixed
light.
– The countdown of the delay start starts.
– The countdown of the delay start decreases with
steps of 1 hour.
– When the countdown is completed, the washing
programme starts automatically.
Do not open the door during the countdown to pre-
vent interruption of the countdown. When you close
the door again, the countdown continues from the point
of interruption.
Cancelling a delay start:
1. Press and hold function buttons B and C until:
– The programme selection indicator lights start to
flash (for about 2 seconds).
– The programme selection indicator lights come on
with a fixed light.
– The digital display shows two horizontal lines (-
-).
When you cancel a delay start, you also cancel the
washing programme.
2. Set a new washing programme.
You can select the washing programme and delay
start also with the door closed. When you press a
programme button you have only 3 seconds to select a
different washing programme or a delay start. After these
3 seconds, the selected programme starts automatically.
End of the washing programme
Switch off the appliance in these conditions:
• The appliance stops automatically.
• The display shows 0.
• The end-of-programme indicator light comes on.
29
