General Preparation:
1. Park vehicle on level ground and secure with tire chucks.
2. Ensure all radio functions are working properly before disassembly.
3. Record any pre-set radio stations if desired as these may be lost when power is disconnected.
4. Remove any CDs to avoid possible jam.
5. Return all Treble, Bass, Fade, and Balance to neutral setting. The DPS is designed to provide
the best audio experience at the neutral settings. You can, however, adjust them to meet your
desired experience.
6. For vehicles equipped with automatic transmissions, place shifter in the N (neutral) position
and set parking brake.
7. Use a 10mm wrench to loosen the negative battery cable bolt. Remove negative battery cable
from terminal and position away from battery.
