SCION tC 2007 - SECURITY (V5)
Preparation
Page 1 of 28 pages
Issue: B 02/27/06
Part Number: PT398-21070
NOTE: Part number of this accessory may not be
the same as the part number shown.
Kit Contents
Item # Quantity Reqd. Description
1 1 V5 Harness
2 1 GBS ECU
Hardware Bag Contents
Item # Quantity Reqd. Description
1 1 V5 Security ECU
2 1 ECU Mounting Bracket
(For V5 ECU and GBS ECU)
3 1 Status Monitor
4 2 Bolts
5 1 Foam Tape Strip (1pcs)
6 40 Wire Ties
7 2 Splicing Connector
8 2 Warning Labels
9 1 Owner’s Manual
10 1 Warranty Card
Additional Items Required For Installation
Item # Quantity Reqd. Description
Conflicts
Note: Do not install in vehicles with factory security
Recommended Tools
Personal & Vehicle
Protection
Notes
Safety Glasses
Safety Gloves Optional
Vehicle Protection Blankets, Part Boxes
Special Tools Notes
Striker Tool (PPO only) CAD-E IADS P/N
ALL 02-016-01
Wiring Terminal Tool (PPO
only)
CAD-E IADS P/N
ALL 02-016-03
Installation Tools Notes
Screwdriver Phillips Head, #2
Wrench 10 mm
Socket 10 mm
Nylon Panel Removal Tool e.g. Panel Pry Tool #1
Toyota SST #00002-06001-01
Side Cutter
Screwdriver Flat Blade, Small
Screwdriver Jeweler’s
Torque Wrench 4.1N·m (36lbf·in)
Pliers
Pick Tool
Special Chemicals Notes
Glass Cleaner Household Windex
General Applicability
Note: tC with factory keyless entry system, only.
Recommended Sequence of Application
Item # Accessory
1 Security
2 Satellite Receiver
3 Audio
4 EC Mirror
*Mandatory
Vehicle Service Parts (may be required for reassembly)
Item # Quantity Reqd. Description
1
2
3
Legend
STOP: Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY:
Use caution to avoid risk of
injury.
CAUTION:
A process that must be carefully observed
in order to reduce the risk of damage to the
accessory/vehicle.
TOOLS & EQUIPMENT:
Used in Figures calls out the
specific tools and equipment recommended for this
process.
