SCION xB 2004 - BASS TUBE (BAZOOKA
®
)
Procedure
Page 9 of 15 pages
Issue: A 08/16/04
11. Reassemble Passenger Front & Rear Scuff
Plates, Passenger Kick Panel, & B-Pillar
Panel
(a) Referencing Step 6 (a), reassemble all panels
into their original locations, making sure that
all clips are securely fastened.
12. Reassemble Glove Compartment
(a) Referencing Step 5 (a), reassemble glove
compartment & storage cup to its original
location, making sure that all clips are
securely fastened.
13. Reassemble Radio
(a) Referencing Step 4 (a), reassemble the Radio
by connecting: 1) T-Harness into the back of
the Radio2) the Satellite harness (if
equipped) and 3) the radio antenna cable.
(Fig. 13-1)
(b) Carefully insert Radio back into center IP
opening, by aligning mounting holes to the
radio bracket. Be sure the wire harness is not
pinched.
(1) Securely fasten (hand tight) the four (4)
mounting screws using the #2 Philips
Screwdriver. DO NOT OVERTIGHTEN
14. Reassemble Center Instrument Panel (IP)
(a) Referencing Step 3 (a), carefully reconnect
all the vehicle connectors back onto the
center IP.
(b) Insert the center IP back onto the dash
assembly by carefully inserting the top
alignment tabs of the center IP into the dash
assembly.
(c) Once tabs are secured, then apply pressure to
the perimeter of the center IP until it is flush
with the dash assembly.
Fig. 13-1
