SCION xB 2004 - BASS TUBE (BAZOOKA
®
)
Procedure
Page 10 of 15 pages
Issue: A 08/16/04
15. Reconnect Battery
(a) Using a 10 mm socket, reconnect the
NEGATIVE (-) battery terminal at a 45-
degree angle and torque to 36 lbf·in
16. Test and Set Up Procedures
(a) If system is installed correctly, the Bazooka
Tube will power up when the vehicle’s
ignition is turned on. (This can be confirmed
by the lighting of the POWER L.E.D. on the
back of the unit.) (Fig. 16-1)
(b) Before proceeding, ensure that the Phase
Switch is in the “UP” Position. (Fig. 8-6)
(1) NOTE: Bazooka Tube will not function
if the Phase Switch is in the down
position.
(c) Using the tone controls on the radio, adjust
the balance left and right, to verify that
Bazooka Tube produces sound on both sides,
and that the sound is loudest when the
balance is set to the center. (Fig. 16-2)
(d) Tune to a radio station or CD, and adjust
volume to a comfortable listening level. (If
the sound is distorted, adjust the gain control
knob counter-clockwise (-) until the Bazooka
Tube produces clean sound. If the unit
cannot be heard, adjust the gain control
clockwise (+) until sufficient output is
achieved.) (Fig. 16-3)
(e) Lowering the rear drivers’ seat allows easy
access to the gain control knob.
STOP
Fig. 16-1
Fig. 16-2
Fig. 16-3
