Prodotti del Marchio Planet

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

- 9 -

- 10 -

3. CHECKLIST

Your GT-70X carton should contain the following items:

● TheGigabitEthernetConverter.

● AC-DCPowerAdapter(Output:5VDC,2Amax.).

● Thisuser’smanual.

If any item is missing or damaged, please consult the

dealer from whom you purchased your Gigabit Ethernet

Converter.

Note

GT-705A is with one vacant SFP module slot.

The mini GBIC SFP module is not bundled

withinthepackage

4. PRODUCT OUTLOOK

Right View (GT-70X)

Left:Fiber-opticconnector,Right:TPconnector.

ThreeLEDindicatorsperTP,berport.

Rear View (GT-70X)

Off

A-N bypass

5V DC

OneDCjackforDCpowerinputandDIPswitchtodisable/

enableAutobypassfunction.

Note

Please note that if converter is connect with

switch which is Auto negotiation supported,

pleaseenabletheA-Nbypassfunction.Ifboth

devicesareconvetersthenpleasedisablethe

A-Nbypassfunction.

5. LED INDICATION

LED Color Description

Fiber/ACT Green

Lit:whentheberportruninx

1000Mbpsandpacketistraveling.

TP/ACT

Green Lit:whenthepacketistraveling.

Fiber/LNK

Green Lit:whenberconnectionisgood.

TP/LNK

Green Lit:whenTPconnectionisgood.

FDX Green

Lit:whentheTPportrunsin

1000MbpsFullduplex.

PWR Green Lit:when+5VDCpowerdetected.

6. INSTALLING THE CONVERTER

Stand-alone Installation:

To install a GT-70X stand-alone, on a desktop or shelf,

simplecompletetofollowingsteps:

● Turn off the power of the device/station in a network to

whichtheGT-70Xwillbeattached.

● Ensurethatthereisnoactivityinthenetwork.

● Attach ber cable fromthe GT-70X to the ber network.

TX,RXmustbepairedatbothends.

● Connect the 5VDC power adapter to the GT-70X and

verifythatthePowerLEDlightsup.

● Turn on the power of the device/station; the PWR LEDs

shouldlightwhenallcablesareattached.

Note

To prevent from optic acceptor malfunction,

check the both wires / transmitter before

powerontheconverter.

GT-705A

● Connect the ber cable. Attach the duplex LC connector

onthenetworkcableintotheSFPtransceiver.

● AttachbercablefromtheGT-705Atothebernetwork.

TX,RXmustbepairedatbothends.

● Connect the 5VDC power adapter to the GT-705A and

verifythatthePowerLEDlightsup.

● Turn on the power of the device/station; the PWR LEDs

shouldlightwhenallcablesareattached.

Note

It recommends using PLANET MGB-SX /

MGB-LX series 1000Base-SX/LX SFP on the

converter. If you insert a SFP transceiver

that is not supported, the converter will not

recognizeit.

7. DUPLEX MODE SUPPORT

The GT-70X is one-channel media conversion between

1000Base-T and 1000Base-SX/LX/LX WDM. 1000Base-T

port can work under Auto-negotiation and xed 1000Mbps

full duplex mode. 1000Base-SX/LX/LX WDM ber port only

workatxed1000Mbpsfullduplexmode.

Note

The fiber interface do not support Auto-

negotiation and can not work with 1000Base-

SX/LXinterfacethatcannotconfiguretofixed

1000Mbpsfullduplex.

8. POWER INFORMATION

ThepowerjackofGT-70Xiswith2.5mminthecentralpost

and required +5VDC power input. It will conform to the

bundled AC-DC adapter and Planet’s Media Chassis. Should

you have the problem to make the power connection,

pleasecontactyourlocalsalesrepresentative.

Please keep the AC-DC adapter as spare parts when your

GT-70XisinstalledtoaMediaChassis.