You can change the standard settings
of your cooktop (see chart).
^
With the cooktop switched off, touch
the cooktop ON/OFF sensor s and
the safety lock sensor $ at the same
time until the indicator lamp for the
safety lock flashes.
A P (Programme) and an S (Status) will
appear in the cooking zone display with
a number which shows the current
setting (see chart).
^
To select the programme you want,
touch the + or - sensor for the front
left cooking zone, then select the
required status by touching the + or -
sensor for the front right cooking
zone (see chart). You can alter
several programmes one after the
other in this manner.
To store the new settings in memory,
touch the cooktop ON/OFF sensor s
until the displays go out.
If you do not wish to store the settings
in memory, touch the safety lock sensor
$ until the displays go out.
If you select the programming function
whilst a residual heat indicator is on,
the residual heat indicator will flash for
up to 45 minutes after you have finished
using the programming function.
However, you can continue to use the
appliance as usual during this time.
Programming
37
