Administrator Operations
2
200/250/350 2-47
Administrator Operations Chapter 2
2.8 Network Setting Function
When access to the Admin. Management mode by the Administrator of the
machine is authenticated, the machine allows the settings to be made of the
IP address and for use of the machine as a network printer.
2.8.1 Setting the IP Address
2
Note
Do not leave the machine with the Admin. Management mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Admin. Management mode.
<From the Control Panel>
0 For the procedure to call the Admin. 2 to the display, see steps 1 and 2
of “Setting the Enhance Security function” on page 2-10.
1 Call the Admin. 2 to the screen from the control panel.
2 Touch [Network Settings].
3 Touch [Basic Settings].
4 Touch [DHCP].
5 Touch [IP Input].
– If [Auto-Obtain] is selected, the IP address is automatically ac-
quired.
6 Touch [IP Address Setting].
7 Set the IP Address.
8 Touch [Enter].
350_security_E.book 47 ページ ２００６年１１月２０日 月曜日 午前１０時４１分
