Prodotti del Marchio Konica Minolta

Saving documents

2-8 200/250/350

Saving documents Chapter 2

Saving data by touching a one-touch dial button

Program a one-touch dial button with the location of a box where data is to

be saved. For details on programming one-touch dial buttons, refer to “Con-

trol Panel Settings” on page 5-2.

Note

In addition to touching a one-touch dial button to select it, it can be se-

lected by entering the number of the one-touch dial button or by search-

ing for it by name. For details on these procedures, refer to the User’s

Guide [Network Scanner Operations].

To save scan data using a one-touch button

1 Load the document.

Function Description Page

Reference

Setting 1 TX Report Select the conditions for printing the results report. p. 2-15

2in1 Select whether or not to send the data using the “2in1”

function (reducing two pages to fit in a single page).

p. 2-17

2-Sided TX Select whether or not a double-sided transmission is

performed. The position of the binding margin and the

page orientation can also be specified.

p. 2-18

Setting 2 Priority TX Select whether or not the data is sent (saved) with pri-

ority over the other jobs.

p. 2-20

Timer TX

Setting

Specify the time for sending (saving) the data. Touch

[Enter] to specify that the data will be sent (saved) at

the specified time.

p. 2-20

Stamp Specify whether the scanned image is stamped to in-

dicate that it has been scanned. In addition, the doc-

ument must be loaded into the ADF.

Note

In order to use the “Stamp” function, op-

tional stamp unit must be installed.

p. 2-21

Network File Name Type in the name of the file to be saved. Up to 16 char-

acters can be entered.

p. 2-22

Email Noti-

fication

Select a recipient registered with a one-touch dial but-

ton where an e-mail message is to be sent to inform

the recipient that the file has been saved.

p. 2-23