Connecting The DFL-200 Network
Security Firewall To Your Network
First, connect the power adapter to the
at the back panel of the DFL-
receptor at the back panel of the DFL-receptor
200 and then plug the other end of the power adapter to a wall outlet or power
strip. The Power LED will turn
to indicate proper operation.
1. Power off your Cable or DSL modem; some devices may not have a on/off
switch and will require you to unplug the power adapter. Now, the DFL-200
should be powered on and the Cable / DSL modem should be turned off.
2. Cable / DSL modem (Power Off
) – DFL-200 (Power On)
Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL
modem. After the Ethernet cable is securely connected, power on the Cable /
DSL modem by turning on the unit or plugging in the power adapter.
3. Cable / DSL modem (
Power On) – DFL-200 (Power On)
Insert the other end of the Ethernet cable to the WAN port on the back
panel of the DFL-200. The WAN LED light will illuminate to indicate proper
connection. If the WAN LED is not illuminated, please go back to step B and
repeat its instructions.
C.
Insert an Ethernet cable to one of the
LAN ports on the back panel of the
DFL-200 and connect it to your internal network host. The LED light for the
LAN port on the DFL-200 will illuminate to indicate proper connection
Connect the computer that you will use to confi gure the DFL-200 to the
