2.6 System Maintenance Mode
The printer enters the system maintenance mode when the Pause, Feed
and Stop keys are pressed and held down simultaneously while turning
the printer on.
If those keys.are pressed further for five seconds after the printer has
entered the system maintenance mode, the system will be reset and the
settings in the backup mehiory will be reset to the following default
values: . . ^
• RS-232C communication setting
Baud rate; 9600 bps
Data length; 8 bits
• Print mode setting
Print mode: Thermal-transfer printing
• Optional function setting
Peeler: OFF
Cutter; OFF
Ejector: OFF
• Paper sensor setting
Sensor: Transparent type (paper gap detection)
• Compatible model setting
Native: ON
[Functions]
Set the RS-232C communication parameter and enter the paper sensor
sensitivity adjustment mode.
• Selects the mode when the Pause key is pressed.
• Selects the mode item when the Feed key is pressed.
• Stores the selected settings in the backup memory when the Stop
key is pressed and the printer comes on-line.
item
LCD indication
—
Baud rate
Data length
Model
Voltage setting
___
I
9600bps -► 19200bps ^ 38400bps ■ • • 4800bps
8 bits 7 bits
NativeON — NativeOF
PE*.*+V —*■ BL*.**V
□
2-5
