4 Technical Note
DHCPv6
C613-05019-00 REV A
25 August 2003
3. Configure the IPv6 interface to receive its address from the DHCP6 server.
Configure the interface to receive its IPv6 address from DHCP6, using the
command:
ADD IPV6 INT=eth0 IPADDRESS=dhcp
Screen outputs for DHCP6 and IPv6 “SHOW” commands are shown in Figures
1 to 5. Table 1 lists the figure number and a description of the figure.
Figure 1: Example output from the SHOW DHCP6 SERVER command.
Table 1: Listing of DHCP6 and IPv6 “SHOW” command outputs.
Figure Number Description
Figure 1
SHOW DHCP6 SERVER
Information about the currently defined server entries that the
DCHP6 client has discovered.
Figure 2
SHOW IPV6 INTERFACE
Information about the interfaces configured for IPv6.
Figure 3
SHOW DHCP6 CLIENT
Information about currently defined client entries on the server.
Figure 4
SHOW DHCP6 INTERFACE
Information about DHCP6 interfaces configured on the router.
Figure 5
SHOW DHCP6 COUNTER
Information about DHCP6 counters.
DHCP6 Servers
-------------------------------------------------------------------------------
Interface .............. eth0
ServerID ............... 0x000386dd0090990a0241
Server Src Address ..... unknown
Reconfigure Key ........ 0x0faeb4e316e5ab204045cd9e26be6109
Primary DNS Server ..... -
Secondary DNS Server ... -
Server Preference ...... 0
Domain Search List .....
IAID ................ 0x00000200
IPv6 Address ..... fec0:0001::0001/128
Expiry ........... 15-May-2003 08:48:14
----------------------------------------------------------------------------
