PVVEX58-300 & PVVEX510-300 Horizontal Power Vent
Page 15
XG0518 - 070714
Step 7: Cut the white bre wire from the power cable.
Figure 6f.
Step 8: Remove 4 screws securing the motor mounting plate.
Figure 6g.
Figure 6h.
Step 9: Lift out motor and capacitor.
REC1253
Figure 6i.
Step 10: Drop new motor assembly into the power vent and screw
with supplied 4 screws and star washers. Line up cut out in motor
mounting plate with electrical conduit.
Figure 6j.
Step 11: Remove the ground wire screw from the motor. NOTE:
Save this screw for later.
Figure 6k.
Service
