30 Finalizing the Installation
Travis Industries 4040708 100-01160
Step 2 Install the twigs and ember chunk (see the illustration below).
Place the left and right
twigs as shown.
Place the ember
chunk as shown.
Step 3 Install the embers along the front of the burner (see the illustrations below).
Do not place the embers over the burner holes.
Front View Side View
! We recommend you purge the gas line at this time (with the glass removed). This allows gas to be
detected once it enters the firebox, ensuring gas does not build up.
3 Turn on the gas to the fireplace. Turn on gas to the heater. Leak test all gas joints prior to starting the
appliance. Start the pilot. Start the main burner. Leak test all gas joints again.
