OVERALL DIMENSIONS
Product Specification Created 3/14
ZIR360NXRHGE Monogram
®
36" Built-In All-Refrigerator
36" (91.5)
25 1/8" (63.8)
23 7/8" (60.7)
*84"
(213.4)
*73 1/4"
(186.1)
69 5/8"
(176.8)
*3"
(7.6)
1 7/8"
(4.8)
*3 1/4"
(8.3)
*83 1/2"
(212.1)
TOP VIEW
35" (89.0)
Case width
36 3/4"
(93.4)
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
** Allow
25" (63.5) min
clearance for 130˚
door swing
**These units are equipped with a 2-position door stop. The factory set 130° door swing can
be adjusted to 90° if clearance to adjacent cabinets or walls is restricted. Allow 15" minimum
clearance to wall for pan removal. If the 90˚ door stop position is used, pan access is
maintained but pan removal is restricted.
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply
is required. An inidividual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 3/8" (64.45 cm)
Door Clearance 36 3/4" (93.4 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 569 lb
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimension may vary due to manufacturing tolerances.
36" (91.5)
25 1/8" (63.8)
23 7/8" (60.7)
*84"
(213.4)
*73 1/4"
(186.1)
69 5/8"
(176.8)
*3"
(7.6)
1 7/8"
(4.8)
*3 1/4"
(8.3)
*83 1/2"
(212.1)
TOP VIEW
ZIR360NXRH
35" (89.0)
Case width
36 3/4"
(93.4)
SIDE VIEWFRONT VIEW
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 4" (10.2) min
clearance to a wall
for 90˚ door swing
** Allow
25" (63.5) min
clearance for 130˚
door swing
**These units are equipped with a 2-position door stop. The factory set 130° door swing can
be adjusted to 90° if clearance to adjacent cabinets or walls is restricted. Allow 15" minimum
clearance to wall for pan removal. If the 90˚ door stop position is used, pan access is
maintained but pan removal is restricted.
