ZyXEL P-330W User’s Guide
33 Chapter 3 Wizard Setup
Figure 9 Wizard 3: Wireless LAN Basic Setup
The following table describes the labels in this screen.
Table 8 Wizard 3: Wireless LAN Basic Setup
LABEL DESCRIPTION
Band Choose the operating mode of your wireless access point. 2.4Ghz (B+G) offers the
greatest compatibility. 2.4 GHz (B) will only allow 802.11b clients to connect to the
wireless LAN. 2.4 GHz (G) will only allow 802.11g clients to connect to the wireless
LAN.
SSID Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the P-330W, make sure all wireless stations use the same
SSID in order to access the network.
Channel
Number
To manually set the P-330W to use a channel, select a channel from the drop-down list
box.
Disable
Access Point
Select this check box to disable the wireless LAN capabilities of your P-330W.
Cancel Click Cancel to abort the setup wizard.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Note: The wireless stations and P-330W must use the same
SSID, channel ID and encryption key (if encryption is enabled)
for wireless communication
3.4 Wizard Setup: Screen 4
There are 5 different versions of this page depending on what method of encryption you want
to enable on your wireless LAN.
