13
6.4. Menu Selections
The following menu selections are available. To access menus, see instructions
under preliminary set-up above.
Xover Sub-Menu:
Load a Xover: Loads a pre-defined crossover.
Design a Xover: Set-up wizard for designing a crossover.
Store a Xover: Stores all output settings as a defined crossover.
Erase a Xover Mem: Erases a Xover from the list
Input Set-up Sub-Menu:
Allows ganging of inputs.
Security Sub-Menu: Locks the unit with a unique user defined 4 digit code. 4
options are available: changes only, changes + view, changes + mutes, everything.
Caution: Do not enter this menu option before reading and understanding
the instructions in section 9.4, Security Sub-menu on page 24.
System Sub-Menu:
System Status: Displays unit information including software version and
temperature.
LCD Contrast: Adjusts LCD contrast.
LED Brightness: Adjusts LED brightness.
Temperature Alarm: Sets a temperature warning value in Centigrade.
Wake-up Time: Sets the unit wake-up time and whether or not the unit starts up in
mute.
Output Meters: Selects output meters to be pre or post mute.
Filter Q or BW: Selects whether Q or bandwidth is displayed in the parametric
screens.
Delay Time/Distance: Selects whether delay is set in time in ms or distance in
metres.
Interface Sub-Menu:
External Mode: Selects baud rate.
AES / EBU Sub-Menu:
Routing options: Selects various routing options if installed.
AES diagnostics: Shows the complete status of the input AES signal. Available only
if the AES option is fitted.
(For more in-depth information on menu functions, refer to
Section 9 page 25.)
