Printer Configuration
Maximum Paper Speed
Max Paper Speed
3.30 ips
Possible Values: 0.32 …3.30* ips
This feature may be used to reduce the maximum paper speed if necessary to allow the printer to use heavier
papers, labels, narrow paper or labels, or some coated papers that have a more slippery finish.
Form Feed Distance
FFeed Distance
1.2608”
Possible Values: 1.0000” … 1.2608”* … 2.5216”
This feature sets the distance that paper is to be moved whenever the user presses the
Paper Feed Button or a
Form Feed character is received from a host system.
Mark Sensing
Mark Sensing
Front
Possible Values: Front*, Back, Gap
Mark Sensing is used to identify form or label position marking and must be set to match the media being used.
The use of Black Mark or Gap sensing is associated with the design of the application program that is
controlling the printer. For more information on Black Mark or Gap sensing, please refer to the MtP Series
Programmer’s Manual.
Note: This feature is only available in MtP300 LP models.
Mark Sensitivity
Mark Sensitivity
0
Possible Values: -10 …0* …+10
This feature allows the Black Mark/Paper Fault sensor to be adjusted to allow for variations in media materials
and Black Mark printing methods. The following list will help determine if, and how, the Mark Sensitivity
should be adjusted.
• If the printer is not detecting black marks reliably, set the Mark Sensitivity to a lower value.
• If the printer is detecting false paper fault conditions, set the Mark Sensitivity to a higher value.
• If the printer is detecting black marks where none exist, set the Mark Sensitivity to a higher value.
18
