• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the delay start (or Finish in option).
Activating the appliance
Press and hold for a couple of seconds the
button to activate or deactivate the
appliance.
A tune sounds when the appliance is
activated. The appliance performs a start
up animation. The animation quickly shows
each washing programme and the default
temperature and spin settings.
The display shows the word On.
Setting a programme
1.
Touch the programme button and
set the programme:
• The indicator of the button
flashes.
• The display shows the programme
duration.
2.
If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something incorrect,
the display shows the message
.
Starting a programme without
the Ende in/Fini dans option
Touch the button .
• The indicator of the button stops
to flash and stays on.
• The programme starts, the door
locks, the indicator
is on.
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
After approximately 15 minutes
from the start of the
programme:
• The appliance adjusts
automatically the programme
duration agree with the
laundry load.
• The display shows the new
value.
Starting a programme with the
Ende in/Fini dans option
1.
Touch the button again and again to
choose the number of hours in which
you want the washing cycle to be
finished.
The display shows the number of hours you
set (e.g. ) and the indicator above the
button is on to show that his option is
active.
2. Touch the button
:
• The door is locked.
• The appliance starts the countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the
set of the Ende in/Fini dans
option before you touch the
button
. After touching the
button
you can only cancel
the Ende in/Fini dans option.
To cancel the the Ende in/Fini dans option:
a. Touch the button to set the
appliance to pause. The indicator of
button
flashes.
b. Touch the button until the
indicator above this button goes off.
12
