ES Boom Lift Capacities
Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side
Boom – 5.7 m (18'8") Counterweight – 6.9 mt (7.6 t) Bucket – None
Stick – 2.9B1 (9'6") Shoes – 790 mm (31") triple grouser Heavy Lift Mode On
6.0 m/20.0 ft
7.5 m kg
25.0 ft lb
6.0 m kg
20.0 ft lb
4.5 m kg
15.0 ft lb
3.0 m kg
10.0 ft lb
1.5 m kg
5.0 ft lb
Ground
Line
kg
lb
–1.5 m kg
–5.0 ft lb
–3.0 m kg
–10.0 ft lb
–4.5 m kg
–15.0 ft lb
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 7.5 m/25.0 ft
m
ft
*4900 *4900 *4200 *4200 6.15
*9,350 *9,350 19.78
*5300 *5300 *3900 *3900 7.28
*11,650 *11,650 *8,600 *8,600 23.71
*5850 *5850 *5450 4150 *3850 3750 7.98
*12,700 12,650 *12,000 8,900 *8,400 8,250 26.10
*8550 *8550 *6700 5600 *5850 4050 *3900 3400 8.35
*18,350 *18,350 *14,500 12,100 *12,700 8,650 *8,600 7,500 27.38
*10 300 8000 *7600 5350 6200 3900 *4150 3300 8.44
*22,250 17,200 *16,450 11,500 13,350 8,400 *9,150 7,250 27.70
*6550 *6550 *11 300 7700 *8250 5150 6100 3800 *4600 3350 8.26
*15,000 *15,000 *24,450 16,550 *17,850 11,100 13,100 8,200 *10,100 7,350 27.09
*7000 *7000 *11 350 *11 350 *11 400 7600 8350 5100 6050 3800 *5400 3600 7.78
*15,600 *15,600 *25,700 *25,700 *24,700 16,300 17,950 10,950 13,050 8,150 *11,950 7,950 25.48
*12 000 *12 000 *15 150 14 800 *10 650 7650 *7900 5100 *6450 4250 6.94
*26,950 *26,950 *32,750 31,650 *23,050 16,450 *17,000 11,000 *14,250 9,400 22.67
*12 050 *12 050 *8650 7900 *6550 5850 5.60
*25,750 *25,750 *18,400 17,000 *14,350 13,150 18.08
*Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Work Tool Offering Guide*
Boom 5.7 m (18'8")
Stick 2.9 m (9'6")
Hydraulic Hammer H115Es
H120Es
H130Es
Multi-Processor MP15**
Pulverizer P215
Mobile Scrap and Demolition Shear S320B**
S325B***
S340B***
Compactor (Vibratory Plate) CVP110
Contractors’ Grapple G120B-G130B
Trash Grapple
Thumbs
These work tools are available for the 320ELRR.
Rakes
Consult your Cat dealer for proper match.
Center-Lock Pin Grabber Coupler
*Matches are dependent on excavator configurations. Consult your Cat dealer for proper work tool match.
**Pin-on only.
***Boom-mount.
23
