Frequently Asked Questions
68
With the help of the following guide, minor faults in the performance of the appli‐
ance, some
of which may result from incorrect operation, can be put right without
contacting Miele Service. This will save time and money.
The following guide may help you to find the reason for a fault, and to correct it.
Y
ou should, however, note the following:
Unauthorized or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably
quali
fied and competent person in strict accordance with current local and na‐
tional safety regulations. The manufacturer cannot be held liable for unauthor‐
ized work.
Technical problems
Problem Possible cause and solution
The display remains
dark and the S
tart indi‐
cator light is not flash‐
ing after the dishwasher
has been turned on with
the button.
The dishwasher is not plugged in.
Inser
t the plug.
The circuit breaker has tripped.
Reset the fuse (see data p
late for the correct fuse
rating).
The dishwasher stops
durin
g a program.
The circuit breaker has tripped.
Reset the fuse (see data p
late for the correct fuse
rating).
If
the circuit breaker trips again, contact Miele
Service.
The door locking pins
do not r
etract after the
door has opened auto‐
matically.
There is a fault with the door mechanism or the door
has n
ot been correctly balanced.
Contact Miel
e Service.
The AutoOpen function must be switched off be‐
fore the dishwasher is used again (see "Settings -
AutoOpen"). Danger of injury in the unlikely event
of another fault.
