RPC-6106/6108 Rackmount LCD Workstation
Step 1: Use box cutters, a knife or a sharp pair of scissors to open the top of the external
(second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors to open the top of the internal
(first) box.
Step 4: Lift the workstation out of the boxes.
Step 5: Remove both polystyrene ends from each side.
Step 6: Pull the plastic cover off the workstation.
Step 7: Make sure all the components listed in the packing list are present.
Step 0:
4.2.3 Packing List
NOTE:
If some of the components listed in the checklist below are missing, please do
not proceed with the installation. Contact the IEI reseller or vendor you
purchased the RPC-6106/6108 from or contact an IEI sales representative
directly. To contact an IEI sales representative, please send an email to
When the RPC-6106/6108 Rackmount LCD Workstation is received, make sure all the
components listed below are present.
Page 18
