Dil ID: 7
Dil Adı: french
Dil Kodu: fr1tayfun Produits de la Marque Hotpoint
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



EN
12
Extra drying
To improve the dryness level of the crockery, press
theEXTRADRYINGbuttonandthesymbolwilllightup.Ifit
is pressed again, the option will be deselected.
A higher temperature during the final rinsing and a longer
drying phase improve the dryness level.
The EXTRA DRYING option increases the duration of
the wash cycle.
Multi-functional tablets (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONALTABLETSbutton;thecorrespondingsymbol
will light up. If the button is pressed again, the option will
be deselected.
The “Multi-functional tablets” option results in a
longer wash cycle.
The use of tablets is only recommended for models
having this option and it is not recommended with wash
cycles which do not specify the use of multi-functional
tablets.
Special wash cycles and Options
Delayed start
It is possible to delay the start time of the wash cycle by 3,
6 or 9 hours:
1:After selecting the desired wash cycle and any other
options, press the DELAYED START button. the indicator
light will go on.
2:Selectthe desireddelaytime bypressingthe Delayed
Start button repeatedly. The wash phase (3 hours), drying
phase(6hours)andend(9hours)indicatorlightswillgoon
in succession.
If the Delayed Start button is pressed again, the option is
deselected and the indicator light goes off.
3. After the selection process, the countdown will begin if
theStart/Pausebuttonispressed.Theselecteddelay-period
indicator light flashes and the Start/Pause button stops
flashing (fixed light).
3.Oncethistimehaselapsed,theDELAYEDSTARTindicator
light goes off and the wash cycle begins.
The Delayed Start function cannot be set once a wash
cycle has started.
Wash options
The OPTIONS may only be set, changed or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
(see Table of wash cycles)
, the
correspondingsymbol/LEDflashesrapidly3times.
If an option is selected which is not compatible with another
previously-selected option, it will flash 3 times and go off,
while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Half load
If there are not many dishes to be washed, a half load cycle
may be used in order to save water, electricity and detergent.
Select the wash cycle and press the HALF LOAD button; the
indicator light will go on.
Press the HALF LOAD button again to deselect this option.
Remember to halve the amount of detergent.