Produits de la Marque Hotpoint

Special wash cycles

and Options

Notes:

Optimum performance levels when using the “Rapid” cycle

can be achieved by respecting the specified number of place

settings.

*TheEcowashcyclecomplieswithregulationAS/NZS2007.

Although it has a longer duration than other wash cycles, it uses

less energy and is less harmful to the environment.

Note for Test Laboratories: forinformationoncomparativeEN

testing conditions, please send an email to the following address:

[email protected]

Wash options

The OPTIONS may only be set, modified or reset after

the wash cycle has been selected and before the Start/

Pause button has been pressed.

Only the options which are compatible with the type of wash

cycle set may be selected. If an option is not compatible

with the selected was cycle

(see Table of wash cycles)

, the

correspondingLEDflashesrapidly3times.

If an option is selected which is incompatible with another

option or wash cycle selected previously, the incompatible

option light will flash 3 times and switches off, while the most

recently selected setting remains lit.

To deselect an option which has been set by mistake, press

the corresponding button again.

Delayed start

It is possible to delay the start time of the wash cycle

by 3, 6 or 9 hours.

1: After selecting the desired wash cycle and any other

options, press the DELAYED START button. the indicator

light will illuminate.

2:Selectthedesireddelay timebypressingtheDelayed

Start button repeatedly; the wash phase (3 hours), the dry-

ingphase(6hours)andend(9hours)indicatorlightswill

illuminate in succession.

If the Delayed Start button is pressed again, the option is

deselected and the indicator light switches off.

3. The countdown will begin once the Start/Pause button

has been pressed. The selected delay period indicator light

flashesandtheStart/Pausebuttonstopsflashing(thelight

becomes fixed instead).

3.Oncethistimehaselapsed,theDELAYEDSTARTindicator

light switches off and the wash cycle begins.

The Delayed Start function cannot be set once a wash

cycle has been started.

Half load

If there are not many dishes to be washed, a half load

cycle may be used in order to save water, electricity

and detergent. Select the wash cycle and press the HALF

LOAD button: the indicator light will illuminate.

Remember to halve the amount of detergent.

It is better to use powder detergent in this case.

This option is incompatible with the following wash

cycle: Rapid wash.

* Only available in selected models.