
105
Ste
Command
Remarks
3. Configure the call hold mode.
call-hold-format { inactive |
sendonly [ moh-number string ] }
The default is inactive.
Configuring call forwarding
Before configuring call forwarding, make sure there is a route from the initiator to the final recipient.
You need to correctly plan forwarded-to numbers to avoid incorrect numbers and circular calls.
A call can be forwarded five times at most.
To configure call forwarding:
Ste
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter voice dial program view.
dial-program N/A
3. Create a POTS entity and
enter POTS entity view.
entity entity-number pots N/A
4. Configure call forwarding.
call-forwarding { no-reply |
on-busy | unavailable |
unconditional } number number
By default, call forwarding is
disabled.
The unconditional, unavailable,
on-busy, and no-reply call
forwarding types can be
configured at the same time and
have a descending order of
priority.
Call services configuration examples
This section provides call services configuration examples.
Call waiting configuration example
Network requirements
As shown in Figure 43, configure call waiting so when a user places a call from Telephone C to
Telephone A that is in a conversation with Telephone B, the subscriber at Telephone C hears ringback
tones, and the subscriber at Telephone A hears call waiting tones.