48 Rev 0.0
USER INSTRUCTIONS
EN
Prolonged non-use recommendations
Run the soak program • twice in succession.
Unplug the power• cord from the socket.
Leave • the door slightly open in order to prevent the formation of unpleas-
ant odors inside the washing tank.
Fill the rinse-aid dispenser• .
Shut off the water supply tap• .
Before starting the dishwasher after prolonged non-use
Check that there are no deposits of sludge or rust inside the water pipe: if •
there are, allow the water to run from the water supply tap for a few min-
utes.
Plug the power cord• back into the socket.
Reconnect the water intake hose and open the tap again• .
9.6 Troubleshooting minor problems
In some cases it is possible to remedy minor problems by referring to the fol-
lowing instructions:
If the program fails to start, check that:
the dishwasher is connected to the electrical power supply; •
there is no power failure; •
the water tap is open;•
the dishwasher door is properly closed. •
If water remains inside the dishwasher, check that:
the drain hose is not kinked•
the drain siphon is not obstructed; •
the dishwasher fi lters are not clogged. •
If the dishes do not come out clean, check that:
the correct amount of detergent has been added; •
there is regenerating salt inside the special container; •
the dishes are being loaded correctly; •
the selected program is suitable for the dish types and their degree of soil; •
all the fi lters are clean and positioned correctly; •
the spray arm nozzles are not obstructed; •
there is no object obstructing the rotation of the spray arms.•
