Bitmap Font
Font Name Symbol Set
Line Printer *9
Printing font samples
If your printer has a control panel, you can print samples of the fonts available in each mode by using
the control panel’s Information Menu. Follow these steps to print font samples.
1. Make sure that paper is loaded.
2. Make sure the LCD panel displays Ready or Standby, then press the r Right button.
3. Press the d Down button to select the font sample for the appropriate mode.
4. Press the r Right button to print the selected font sample sheet.
Note:
You can print a font sample sheet from a Web browser if your printer supports EpsonNet Config with
Web Browser.
Adding more fonts
You can add a wide variety of fonts to your computer. Most font packages include an installer for this
purpose.
See your computer documentation for instructions on installing fonts.
Selecting fonts
Whenever possible select fonts in your application. See your software documentation for instructions.
If you are sending unformatted text to the printer directly from DOS or if you are using a simple
software package that does not include font selection, you can select fonts using the printer’s control
panel menus or by using EpsonNet Config with Web Browser when in the PCL, ESC/P 2, FX, or I239X
emulation mode.
Epson Font Guide
Working with Fonts 27
