Produits de la Marque Dell

Back to Contents Page

 Computer Cover

Dell™StudioXPS™8100ServiceManual

Removing the Computer Cover

Replacing the Computer Cover



Removing the Computer Cover



1. Follow the procedures in Before You Begin.



2. Lay the computer on its side with the computer cover facing up.



3. Remove the thumbscrew securing the computer cover to the chassis, using a screw driver, if necessary.



4. Release the computer cover by sliding it away from the front of the computer and lift it up.



5. Set the computer cover aside in a secure location.

Replacing the Computer Cover



1. Follow the procedures in Before You Begin.



2. Ensure that all cables are connected, and fold cables out of the way.



3. Ensure that no tools or extra parts are left inside the computer.



4. Align the tabs at the bottom of the computer cover with the slots located along the edge of the chassis.



5. Press the computer cover down and slide it towards the front of the computer.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your

computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: Ensure that sufficient space exists to support the computer with the cover removed—at least 30 cm (1 ft.) of desk top space.

thumbscrew

computer cover