Body panels
Remove the centre trim
panel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the seat ( 38).
Remove screws 1 on left and
right.
Remove oil dipstick 2 and re-
move the centre trim panel.
Install the oil dipstick.
Installing centre trim
panel
Remove oil dipstick 2.
Hold the centre trim panel
in position and install oil dip-
stick 2.
Install screws 1 on left and
right.
Installing seat ( 39).
Remove the right side
panel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the centre trim panel
( 98).
Remove screws 1 and 2.
8
98
z
Maintenance
