AL; Reviewed:
SPOC 8/24/2006
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
20 of 23
JNPR-M7i-J4300
Step Description
9.
Configure the appropriate audio codec using the change ip-codec-set command. The
following shows ip-codec-set 2 using G.729B. The G.711MU codec was also verified
during the compliance testing. Media encryption was set for both aes and none to
ensure interoperability with AES capable endpoints.
change ip-codec-set 2 Page 1 of 2
IP Codec Set
Codec Set: 2
Audio Silence Frames Packet
Codec Suppression Per Pkt Size(ms)
1: G.729B n 2 20
2:
3:
4:
5:
6:
7:
Media Encryption
1: aes
2: none
3:
10.
Save the configuration using the save translation command.
save translation
SAVE TRANSLATION
Command Completion Status Error Code
Success 0
11.
Repeat Steps 1-10 in this section for Avaya Communication Manager in the Branch Site
to complete the configuration. Make sure the appropriate IP address information is
entered when configuring the Branch Site. At the Branch site, the “near end” is the
Avaya S8300 Media Server and the “far end” is the C-LAN at the Main site.
6. Interoperability Compliance Testing
The interoperability compliance testing focused on assessing the ability of the Juniper Networks
routers in supporting an Avaya IP Telephony infrastructure consisting of Avaya Communication
Manager and Avaya IP Telephones. A data traffic generator and a call generator were used to
simulate background traffic and additional voice flow in a typical network environment.
